Latest elisa plate Tenders | Government elisa plate Tenders

Central Government/Public Sector

CTN :45658508

14 Jul, 2026 10.00 Lacs

Lucknow - Uttar Pradesh

Tender For supply of elisa plate washer (v2) (q2)

CTN :45658718

14 Jul, 2026 NA

Parganas - West Bengal

Tender For supply of elisa plate washer (v2) (q2)

State Government

CTN :45642829

30 Jun, 2026 NA

Davangere - Karnataka

Tender For e-tenders are invited from eligible suppliers for scientific equipments required for vgst sponsored project at department of studies in microbiology - mb/ elisa plate reader, mb/ ultra-low temperature freezer, mb/ double beam uv visible spectrophotometer, mb/ micro-pipette set for cell culture, mb/ electrophoresis unit (sds-page), mb/ microcentrifuge

CTN :45415553

25 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : purchase of chemicals - purchase of chemicals, sterile tissue culture plate 96 flat-bottom wells, tissue culture treated surface, sterile, individually packed with size approx. 6.9 10.8 cm compatible with elisa/plate reader., sterile tissue culture plate 6 wells, growth surface treated sterile in condition well dimension approx. 35 17.5 mm., sterile tissue culture flask without hpde filter closure non-vent cap is required, flask must be sterile, disposable, and it must have 25 cm growth area., sterile tissue culture petri dish 35 mm diameter, tissue culture treated each plate must be sterile., cryogenic marker resistant to low temperature storage ( 20 c to 80 c), permanent ink, multi-colour pack red, blue, green and black, standard flask 100 ml borosilicate glass, autoclavable, chemical resistant, standard flask 250 ml borosilicate glass, autoclavable, chemical resistant

CTN :45577679

06 Jul, 2026 1.73 Lacs

Delhi - Delhi

Tender For supply of tissue culture flask one hundred seventy five sterile pkt of forty , adhesive pcr or elisa sealer pkt of hundred , elisa plates with lid flat bottom sterile pkt of hundred , cell scraper two hundred twenty mm pkt of hundred , cell scraper two hundred eighty mm pkt of hundred , mtt three four comma five dimethyl two thiazolyl two comma five diphenyl two h tetrazolium bromide , microscope slide label , rmpi one six four zero media with l glutamine twennty five mm hepes buffer and sodium bicarbonate , histopaque one zero seven seven hundred ml sterile , one x rbc lysis buffer , colcemid solution sterile , giemsa stain solution , kcl solution sterile , methanol , glacial acetic acid , oil immersion , dpx mountant , pha m solution sterile , coplin jars pkt of twelve , kimwipes pkt of twelve , slide horizontal carrying tray pkt of two , slide vertical drying tray pkt of two , borosil bottle hundred ml , borosil bottle two fifty ml pkt of two , borosil bottle fifty ml pkt of two , borosil bottle five hundred ml pkt of two , borosil petridish hundred mm pkt of two * /bid number : gem/2026/b/7663645 + /dated: 16-06-2026 ' ' / bid document 1 / 25

Central Government/Public Sector

CTN :45558061

06 Jul, 2026 NA

Raigad - Maharashtra

Tender For supply of elisa plate washer (v2) (q2)

CTN :45240117

22 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply of biosafety cabinet (q2) , refrigerated centrifuge for general and research purpose (q3) , medical centrifuge (q3) , gel documentation system (q2) , deep freezer (q2) , water baths (q3) , auloclave-1 , autoclave-2 , bod incubator-1 , bod incubator-2 , data logger -80c, -20c , data logger - 80c, -20c, plus 4c 2no , elisa plate reader-1 , elisa plate reader-2 , elisa plate reader-3 , elisa plate washer-1 , elisa plate washer-2 , elisa plate washer-3 , floater rack , gel electrophoresis , gel electrophoresis and documentation unit , gel electrophoresis anddocumentation unit , laminar air vertical flow system , ice buckets , ice flaker machine , label printer , label printer brady printer , laboratory incubator , laboratory rocker and shaker , laminar air flow horizontal , laminar air vertical flow 2 feet , magnetic stirrer-1 , magnetic stirrer-2 , magnetic stirrer-3 , micro pipette 0.5 - 10 ul , micro pipette 10 - 100 ul , micro pipette 100 - 1000 ul , micro pipette 2 - 20 ul , micro pipette 20 - 200 ul , micropipettes , microwave oven for agarose gel , microwave oven for agarose gels , multi channerl 30 - 300 ul , multifunctional copier or printer or scannerfor office work , pan electronic weighing balance-1 , pan electronic weighing balance-2 , pcr workstation , ph meter , quick spin , quick spinner-1 , quick spinner-2 , quickspin for 1.5, 2ml tubes. pcr tubes and plates , refrigerated micro centrifuge , refrigerated microfuge , refrigerator , refrigerator sample receiving , themo cycler-3 , themocycler-2 , thermo cycler-1 , timer-1 , timer-2 , ultrapure water system , unichannel and multichannel pipettes , uv dosimeter-1 , uv dosimeter-2 , uv dosimeter- 3 , vortex mixer-1 , vortex mixer-2 ) /bid number : gem/2026/b/7544629 * /dated: 18-05-2026 & & / bid document 1 / 69

CTN :45071742

30 May, 2026 1.92 Crore

Mainpuri - Uttar Pradesh

Tender For bid to ras providing of design installation and maintenance of educational lab/centre - science lab; site preparation, supply and installation of hardware, maintenance of hardware (amc/cmc), lab equipments; buyer,design installation and maintenance of educational lab/centre - smart class lab; site preparation, supply and installation of hardware, maintenance of hardware (amc/cmc), furniture, smart class; buyer,design installation and maintenance of educational lab/centre - ict lab; site preparation, supply and installation of hardware, maintenance of hardware (amc/cmc), mfm machine; buyer,design installation and maintenance of educational lab/centre - ict lab; site preparation, supply and installation of hardware, maintenance of hardware (amc/cmc), computers; buyer,design installation and maintenance of educational lab/centre - ict lab; site preparation, supply and installation of hardware, maintenance of hardware (amc/cmc), diesel generator set and ro; buyer -uv-vis spectrophotometer laminar air flow autoanalyser , elisa reader & elisa plate deep freezer(-20 c) fluorescence microscope 02 & co2 gas analyser fume hood , hysteresis loop hall effect polymer white microcentrifuge 12500 rpm calorimeter digital turbidity meter cod digester advance rotary microtome single phase stefans boltzmann law ,advance rotary microtome single phase stefans boltzmann law freezing point apparatus melting point centrifugal machine tlc complete set hot plate with magnetic stirrer water distillation , digital muffle furnace soxhlet apparatus refrigerator digital analytical balance fet characteristics apparatus charecterestic of scr study and verification of and, nand, xor, nor gate (complete kit

CTN :45292959

06 Jun, 2026 NA

Patiala - Punjab

Tender For supply of micro elisa plate reader with co2 incubator

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Elisa Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government